Alltrax Communications Kit For reprogramming your AXE or DCX series controller   Price: AU$75.00 Availability: In stock   Add to cart:

Description

The Programmable Alltrax Electric Motor Controllers such as the AXE (Series wound motors) and the DCX (Shunt wound motors) include an RS232 communications port. This port can be used to adjust user settings such as throttle type, power settings, and speed settings. It can also be used to monitor operation of the controller real time.

This kit includes:
Communications cable - RS232 to USB adapter
CD-R with Controller PRO operators manual, tech-notes, and the Controller PRO software program
Wall wart (115 VAC 50Hz transformer) supplies 15-20 Volts DC to power the logic for programming. NOTE: Input is for USA votage
Instruction Manual & Technical notes (also available from web site)
Free technical support from Alltrax

Specifications:
Communications: Standard RS232 at 9600 BAUD (8data, 1-stop, no parity)
Compatibility: MS Windows 98, NT, 2000, XP-HOME, XP-Pro, Vista (See
bulletin)
Controller Power Required: 15VDC min, 18VDC recommended - or Battery Pack voltage
Computer: Standard IBM style with 232 communications port
Protocol: Controller table ACSCII response - proprietary communications (Controller Pro must be used)
Capabilities: Read Memory, Upgrade Software, Change user settings

Manufacturer's website:

• http://www.alltraxinc.com/Products_ControllerPro.html

Datasheets:

• Doc120-017-D_OP-Controller-Pro.pdf